Telenetics 56 - Manual (Page 49)

AT Commands
Page 41
Example: ACF3_V1.000
Modulation = V90, V34, or V32 for V.92/V.90, V.34, or
V.32bis, respectively.
Model = Identifies RAM/ROM configuration.
For the SmartSCM, the codes are in the form
RevisionName-Modulation, where:
RevisionName = masked firmware code version.
Example: P2109
Modulation = V90, V34, or V32 for V.90, V.34, or V.32bis,
respectively.
Examples:
ACF3_V1.000-V90_P21_FSH
P2109-V90
Note: If RPI+ is enabled (see +Hn), “ROCKWELL RPI
(TM) MODEM+01” is appended.
4 Reports OEM defined identifier string in either Hayes-
compatible binary format (default) or ASCII format
(selectable by ConfigurACE), e.g.:
a007040284C6002F
bC60000000
r1005111151012000
3000111170000000
5 Reports Country Code parameter (see +GCI).
6 Reports modem data pump model and internalcode
revision. Example:
“RCV56DPF-PLL L8773A Rev 14.00/34.00”.
7 Reports “OK”.
Result Codes
OK <value> = 0 - 7.
ERROR Otherwise.
+GMI - Request Manufacturer Identification
This command causes the modem to report the modem product manufacturer.
Syntax +GMI
Typical Response
+GMI: CONEXANT
OK
+GMI9 - Request Conexant Identification
This command causes the modem to report CONEXANT ACF identification. The
response cannot be modified using ConfigurACE.
Syntax +GMI9
Typical Response
+GMI9: CONEXANT ACF
OK