First time log on – UTStarcom UT-300R2 User Manual

Page 18

background image

Chapter 3 Before Configuring UT-300R2


First Time Log on

After inputting the forgoing IP address on URL address bar, a
new window appears prompting you for a user name and
password needed to gain access the web configuration

Figure 6

Log On Interface

Use the default system user name:


and password:


for first time set up. You can change the password once

you have established the ADSL connection. The user name and
password allows any computer on the same subnet as the UT-
300R2 to access the web configuration manger. This password
can also be used to Telnet to the device through the Ethernet or
the Internet interfaces.