UTStarcom UT-300R2 - Manual (Page 49)

Chapter 5 Advanced Configuration / Network Management 47
Directory Configuration and Read-only Menus
Trigger
Port
This is the TCP or UDP port number that will be used
to initiate a connection from the LAN to the WAN
(internet) from a PC on your LAN that is running this
application. The entry can be either a single port
number or a range of port numbers. Consult your
application documentation to determine the port
numbers that should be included.
Trigger
Type
This is either the TCP or UDP protocol, that the
application uses to establish connections between
PCs.
Public
Port
This is the port number on the WAN (internet) that will
be used to access to this application. This can be
either a single port number or a range of port numbers.
Use a comma to add multiple ports or port ranges.
Public
Type
This is the TCP or UDP port number that will be used
to initiate a connection from the WAN (internet) to a PC
on your LAN that is running this application. The entry
can be either a single port number or a range of port
numbers. Consult your application documentation to
determine the port numbers that should be included.
Click the Apply button to put the new virtual server
configuration set or modification into effect. Any Special
Application configured in the menu will appear in the Special
Applications List with the new settings. The UT-300R2 must
save the new settings and reboot before the new Special
Applications configurations are applied.
To remove any configuration set from the Special Applications
List, click on the trashcan icon for set you want to delete.