Xantrex Technology Automatic Generator - Manual (Page 32)

Installation
2–10 975-0082-01-01
Type 1
Type 1 is a three-wire GlowStop configuration recommended for “three-
wire” generators with glow plugs that need to be operated before a start is
attempted.
Figure 2-3 Type 1 connection diagram
Table 2-2 Type 1 relay and timing preset configurations
Relay 1 mode GlowStop
Relay 3 mode No function
Gen Run signal hold time 0.5 s
Preheat time 20 s
Preheat to crank delay 1 s
Crank time 15 s
Crank retry time 30 s
Shutdown bypass time 0 s
Start tries 3
18
17 START
16
14
13
12 GEN RUN SIGNAL
GROUND
STOP/PREHEAT
Relay 1
Relay 2
5A fuse
5A fuse
AGS wiring harness Generator wires
Complete overcurrent protection
not shown. Refer to page 2–6.