Errored legacy frame reception, Legacy mac header filters, Figure 7-2 – Xilinx IP Ethernet AVB Endpoint v2.4 UG492 User Manual

Page 67: Overview of operation

Advertising
background image

Ethernet AVB Endpoint User Guide

www.xilinx.com

67

UG492 September 21, 2010

Rx Legacy Traffic I/F

Errored Legacy Frame Reception

As illustrated in

Figure 7-2

, reception of any frame in which the

legacy_rx_frame_bad

is asserted (in place of legacy_rx_frame_good) indicates

that this frame must be discarded by the Legacy client; it was either received with errors or
was not intended for the legacy traffic interface.

Legacy MAC Header Filters

Overview of Operation

MAC Header Filters are provided on the receiver legacy traffic path as illustrated in

Figure 5-1

. These have a greater flexibility than the standard address filter provided in the

Tri-Mode Ethernet MAC (which must be disabled). The MAC Header Filters include the
ability to filter across any of the initial 16-bytes of an Ethernet frame, including the ability
to filter only on the Destination Address, Length/Type Field, VLAN tag (if present), or any
bit-wise match combination of the preceding. Eight individual MAC Header Filters are
provided, numbered from 0 through to 7, each of which is separately configured.

X-Ref Target - Figure 7-2

Figure 7-2:

Errored Frame Reception across the Legacy Traffic Interface

rx_clk

legacy_rx_data[7:0]

legacy_rx_data_valid

legacy_rx_frame_good

rx_clk_enable

DA

SA

VLAN

legacy_rx_frame_bad

Advertising