Xerox DocuColor 2060 - Manual (Page 118)

S C A N N E R
D O C U C O L O R 2 0 6 0 / 2 0 4 5 O P E R A T O R M A N U A L 4–8
Auto Image Rotation
The DocuColor 2060/2045 offers an automatic rotation feature for 8.5 x 11 inch,
or A4, original documents input from both the Duplex Automatic Document
Feeder and the Document Glass. This feature must be activated through Tools
Mode. Refer to the System Administration Guide for the procedure.
If the scanner detects that the orientation of the original document is different
from the orientation of the paper tray selected, an orientation mismatch message
appears and asks if you want to rotate the image. Select “Yes” to rotate the
image.
If you do not want to rotate the image, select “No”. Use the Reduce/Enlarge
feature, on the Basic Features tab, to fit the image onto the paper orientation
selected.
White Border Edges on Copies
All copies made on the DocuColor 2060/2045 have white border edges on four
sides of the output. There is a factory setting which removes 2 mm from all four
edges of the scanned original. This factory setting cannot be altered.
If the white border edges result in image loss on your copies, select the Auto%
option in the Reduce/Enlarge feature to minimize the image loss. The Auto%
option automatically reduces or enlarges the copy, based on the size and
orientation of the document and the paper tray selected. This option is applied
only to standard size documents.
You may also use the Auto Center feature to ensure the original is centered on
your output. For more information on Auto Center, refer to the Edge Erase feature
in the Added Features section.