Xerox DocuColor 2060 - Manual (Page 54)

O V E R V I E W
D O C U C O L O R 2 0 6 0 / 2 0 4 5 O P E R A T O R M A N U A L 2–4
Part Description
Control Panel Allows keypad selection of features. Refer to the Control
Panel section in this chapter.
Dry Ink/Toner
Compartment Contains the Dry Ink/Toner cartridges.
Offset Catch
Tray (OCT) Receives completed print job. Sets are offset for easy
separation. Maximum capacity is 500 sheets of 24
pound (90 g/m
2
) paper.
Right/Left Front
Doors Houses the image transfer system for simplex and
duplex printing. Open to clear jams in the paper path in
the Printing Module and at the Fuser. Follow the
instructions precisely for clearing a jam in the Fuser.
CAUTION: The Fuser is extremely hot and will
cause injury if clearing jam instructions are not
followed.
Exit Module Contains the decurler and the inverter. The decurler
removes any curl from the printed page. The inverter is
used when duplexing or face down output is selected.
Ground Fault
Indicator (GFI)
Circuit Breaker Not shown in Figure 1, refer to Figure 5. This device trips
if an interruption is detected in the power to the digital
press.