Xerox DocuColor 2060 - Manual (Page 98)

P A P E R A N D P A P E R T R A Y S
D O C U C O L O R 2 0 6 0 / 2 0 4 5 O P E R A T O R M A N U A L 3–6
Table 1. Paper Guidelines
*Requires a Paper Guide to be removed to run these sizes.
Call your Xerox service representative for the Side Guide removal.
**Refer to Non-standard Size Paper in this chapter.
NOTE: If you have an optional High Capacity Stacker (HCS), the back
sometimes comes off when printing labels with the Stack Mode selected. Use
the Top Tray Mode when printing labels to avoid this problem.
KEY POINT: When feeding paper short edge feed and you have an optional
High Capacity Stacker (HCS), the output must be sent to the High Capacity
Stacker Top Tray.
Paper Tray 1/Tray2 Tray 3
Paper Size JIS B5 (LEF/SEF)
8.5 x 11 inch/A4 (LEF/SEF)
JIS B4 (SEF)
ISO B4
8 x 10 inch (LEF)
8.5 x 13 inch (SEF)
8.5 x 14 inch (SEF)
11 x 17 inch/A3 (SEF)
12 x 18 inch (SEF)*
12.6 x 17.7 inch/SRA3 (SEF)* JIS B5 (LEF/SEF)
8.5 x 11 inch/A4 (LEF/SEF)
JIS B4 (SEF)
ISO B4
8 x 10 inch (LEF)
8.5 x 13 inch (SEF)
8.5 x 14 inch (SEF)
11 x 17 inch/A3 (SEF)
12 x 18 inch (SEF)
12.6 x 17.7 inch/SRA3 (SEF)
12.6 x 19.2 inch (SEF)
Paper Weight Range 64 - 220 g/m
2
64 - 280 g/m
2
Transparencies No Yes
Labels No Yes
Transfer Paper No Yes
Coated Paper No Yes
Tabbed Inserts** No Yes
Drilled Yes Yes