Xerox DocuColor 2060 - Manual (Page 270)

P R O B L E M S O L V I N G
D O C U C O L O R 2 0 6 0 / 2 0 4 5 O P E R A T O R M A N U A L 6–4
Problem Suggested Solution
Transparencies • Load the transparencies by following the
instructions in Chapter 3, “Paper and Paper
Trays.
Transparencies are
too oily. • Make 5 blank sheet copies with the Full Color
option on paper stock to purge excess oil from
system. Reload the transparencies and
continue the copying job.
• Refer to the Recommended Materials List and
the Color Materials Usage Guide for more
information about transparencies.
Multiple sheets feed
from the paper trays. • Do not fill the paper trays above the MAX fill
line indicator.
• Remove the paper from the tray and fan the
sheets to separate the joined sheets.
• Predrilled sheets may stick together at the
holes. Remove the paper from the tray and fan
the sheets to separate the joined sheets.
• Paper and transparencies may stick together if
environmental conditions are too dry and
cause excessive static. Increase the humidity
level in the room to minimize static.
• Gently fan transparencies to separate the
sheets before you load them.