Non-standard size paper, Letterhead, Coated paper – Xerox DocuColor 2060 User Manual
Page 220: Non-standard size paper –8, Letterhead –8, Coated paper –8
A
C C E S S O R I E S
T
R A Y
4
D O C U C O L O R
2 0 6 0 / 2 0 4 5
O P E R A T O R M A N U A L
5–8
Non-standard Size Paper
Non-standard size paper (7.2 to 12.6 (LEF) or 7.2 to 19.2 (SEF)) can be loaded into
Tray 4. Ensure that Non-standard size paper is selected on Tray 4. Refer to the
System Administration Guide, Tools Mode chapter, for programming non-
standard size paper.
Letterhead
Different inks and dry inks/toners are used to produce preprinted letterhead that
may not pass through the digital press intact.
Refer to the Specialty Media Guide that came with your documentation for
information on using preprinted letterhead paper.
Coated Paper
Follow the directions on the ream of paper when loading coated paper.
NOTE:
Remove any remaining sheets from the Elevator Tray before loading a
different paper stock.