Xerox DocuColor 2060 - Manual (Page 277)

P R O B L E M S O L V I N G
D O C U C O L O R 2 0 6 0 / 2 0 4 5 O P E R A T O R M A N U A L
P
R
OBLEM
S
O
LV
IN
G
6–11
Problem Suggested Solution
The copies are blurred
when copying thick
documents, three-
dimensional objects,
or books. • Increase the Sharpness.
• Select the Text or Maps option in the Original
Type feature.
• Ensure that the document is held flat on the
Document Glass and that the document cover
is closed as much as possible. DO NOT force
the cover closed.
The image quality
gradually degrades on
successive copies, or
copies made with
settings used
previously are
significantly worse
than copies you are
making now. • The internal process control function of the
digital press with scanner has degraded.
• Place a white sheet of paper on the Document
Glass and run 35 blank copies using Full Color
in the Color Mode feature. Make a copy of the
document again. Ensure that the image quality
selections are set properly.
• If the problem persists, contact your System
Administrator or refer to the System
Administrator Guide.
Copies have dark
bands on the lead
edge and a corner
when 100% Reduce/
Enlarge is selected. • The bands may be caused by curled edges on
the document or by misregistration of the
document on the Document Glass. Ensure that
the document is registered correctly.
• Ensure that the Edge Erase is at No Erase (2
mm). Increasing the amount of Edge Erase
should remove more of the dark bands but
could cause image loss.