Xerox DocuColor 2060 - Manual (Page 19)

S A F E T Y N O T E S
D O C U C O L O R 2 0 6 0 / 2 0 4 5 O P E R A T O R M A N U A L
S
A
FETY
NO
TES
xix
Operational Safety
Your Xerox equipment and supplies were designed and tested to meet strict
safety requirements. These include safety agency examination, approval, and
compliance with established environmental standards.
Your attention to the following safety guidelines will help ensure the continued
safe operation of your digital press:
• Use the materials and supplies specifically designed for your digital press.
The use of unsuitable materials may result in poor performance of the
machine and possibly a hazardous situation.
• Follow all warnings and instructions that are marked on or supplied with the
machine.
• Place the machine in a room that provides adequate space for ventilation
and servicing.
• Place the machine on a level, solid surface (not on a thick pile carpet) that
has adequate strength to support the weight of the machine.
• Do not attempt to move the machine. A leveling device that was lowered
when your machine was installed may damage the carpet or floor.
• Do not set up the machine near a heat source.
• Do not set up the machine in direct sunlight.
• Do not set up the machine in line with the cold air flow from an air
conditioning system.
• Do not place containers of coffee or other liquid on the machine.
• Do not block or cover the slots and openings on the machine. Without
adequate ventilation, the machine may overheat.
• Do not attempt to override any electrical or mechanical interlock devices.
WARNING: Be careful when working in areas identified with this warning
symbol. These areas may be very hot and could cause personal injury.
If you need any additional safety information concerning the machine or
materials, contact your Xerox representative.