Xerox DocuColor 2060 - Manual (Page 315)

M A I N T E N A N C E
D O C U C O L O R 2 0 6 0 / 2 0 4 5 O P E R A T O R M A N U A L
M
A
INTEN
AN
CE
8–11
1
Open the Waste Dry Ink/Toner door at the back of the Exit Module. Refer to the
following figure.
Figure 7. Waste Bottle Door opened
2
Grasp the handle of the full bottle and pull it out of the machine.
3
Remove the cap from the cap holder on the side of the full bottle and press the
cap securely into the open hole on the top of the full bottle.
Figure 8. Waste Dry Ink/Toner Bottle
4
Dispose of the full bottle according to your local regulations.
5
Remove an empty bottle from the carton and insert it into the machine. Ensure
that the hole on the top of the bottle is open.
6
Close the Waste Dry Ink/Toner Bottle door.
Cap in
holder
Open hole