Xerox DocuColor 2060 - Manual (Page 59)

O V E R V I E W
D O C U C O L O R 2 0 6 0 / 2 0 4 5 O P E R A T O R M A N U A L
OVER
VIEW
2–9
Touch Screen
Use the Touch Screen to select features and options for the scanned output.
It also displays messages that indicate the status of the digital press during idle,
run, or fault conditions.
The Touch Screen displays the default screen selected in the Tools Mode by your
System Administrator. The default screen can be either the Basic Features, Job
Status, or Machine Status screen.
Message Area
The message area at the top of the Touch Screen displays messages concerning
the digital press status, programming conflicts, or errors. Messages may also
provide instructions for the operator.
Tabs/Buttons/Icons
Some screens on the Touch Screen display tabs which contain various selectable
options. Refer to the example on the following page.
Features and options are initially set to the factory default settings. These
settings can be changed by your System Administrator in Tools Mode.
Ask your System Administrator for more information regarding these selections,
or refer to the System Administration Guide.