Xerox DocuColor 2060 - Manual (Page 130)

S C A N N E R
D O C U C O L O R 2 0 6 0 / 2 0 4 5 O P E R A T O R M A N U A L 4–20
100%
100%, located in the Reduce/Enlarge column on the Basic Features screen,
ensures that the entire original is copied if the paper tray selected and the
original are the same size.
Auto%
The Auto% option, located in the Reduce/Enlarge column on the Basic Features
screen, automatically reduces or enlarges the image, based on the size and
orientation of the document and the paper tray selected. This option is applied
only to standard size documents.
Select Auto% when the original document and the copy paper are different sizes.
KEY POINT: A factory default setting of 2 mm edge erase applies to making
copies. This setting cannot be altered.
The image is reduced or enlarged in the same proportions for the X (horizontal)
and Y (vertical) directions.
The Auto Paper option in Paper Supply is not available when Auto% is selected
and may not be available for your configuration.
Third Button
The third button in the Reduce/Enlarge column is set to a factory default. 129%
is an example of how the value can be set. This factory default can be changed in
the Tools Mode. For more information on how to change this default, refer to the
System Administration Guide.
Fourth Button
The fourth button in the Reduce/Enlarge column is set to a factory default. 64%
is an example of how the value can be set. This factory default can be changed in
the Tools Mode. For more information on how to change this default, refer to the
System Administration Guide.