Unloading the high capacity stacker stapler, Unloading the high capacity stacker stapler –47 – Xerox DocuColor 2060 User Manual
Page 259
H
I G H
C
A P A C I T Y
S
T A CK E R
S
T A P L E R
( H C S S )
A
C C E S S O R I E S
D O C U C O L O R
2 0 6 0 / 2 0 4 5
O P E R A T O R M A N U A L
AC
CESSO
RIES
5–47
NOTE:
Stapled sets of large paper (A3, 11 x 17" and greater) may stack
slightly skewed. The stapled sets will be of high quality.
Stapling Capacity for Different Paper Types and Weights
Following is the staple capacity for various types and weights of paper.
* 221 to 280 g/m
2
paper, either coated or uncoated, cannot be stapled. These
weights will be stacked in the Top Tray.
Unloading the High Capacity Stacker Stapler
To ensure consistent quality, unload sets of less than four sheets and lighter
weight paper after 50 sets are made, or when the curl of the sets inhibits the
ability of the sets to exit the HCSS.
When the Stack Tray is full, Fault Code 112-550 appears in the message display
on the HCSS. The digital press Touch Screen displays a message, "Unload the
Main Tray of the Finisher".
The HCSS continues to stack sheets into the Stack Tray after the message
appears, but excess sheets may have a degraded stacking quality. For best
performance, unload the tray when 2,000 sheets have been stacked.
Paper Weight
Coated
Uncoated
Mix Sizes
64–80 g/m
2
50
50
No
81–105g/m
2
42
42
No
106–135 g/m
2
31
31
No
136–150 g/m
2
26
26
No
151–220 g/m
2
18
18
No
221–280 g/m
2
No *
No *
No
Transparencies
No
No
No