Xerox DocuColor 2060 - Manual (Page 194)

S C A N N E R
D O C U C O L O R 2 0 6 0 / 2 0 4 5 O P E R A T O R M A N U A L 4–84
3
If a finishing device is attached to your configuration, select where to feed the
output. It is recommended that the transparencies be output to the Top Tray even
though both selections are valid.
Figure 65. Transparency Set + Dividers Screen
4
If Transparency Set + Dividers or Dividers Only is selected, indicate the
paper tray where the dividers are loaded.
5
Touch the Save button.
6
Continue selecting options for your job.
7
When you are finished selecting options, press the Start button.