Xerox DocuColor 2060 - Manual (Page 278)

P R O B L E M S O L V I N G
D O C U C O L O R 2 0 6 0 / 2 0 4 5 O P E R A T O R M A N U A L 6–12
Problem Suggested Solution
Copies have dark
bands on the lead
edge and a corner
when 100% Reduce/
Enlarge is selected
and the DADF is used. The bands may be caused by curled edges on the
document or by misregistration of the document by
the DADF. Ensure that the Edge Erase is at No Erase
(2 mm). Increasing the amount of Edge Erase should
remove more of the dark bands but could cause
image loss.
Corner Shift appears
in the wrong area on
the copy. Ensure the document is positioned on the
Document Glass and the correct Corner Shift is
selected.
Large black borders
appear on the copies
with documents
smaller than the copy
paper size. • No shift is selected. Select the Auto Center
feature to eliminate the black borders.
• Also, select the Auto Center feature to
eliminate the black borders for digital press
with scanners equipped with the Duplex
Automatic Document Feeder (DADF).
The image density of
the copy seems
lighter toward the
trail edge. This defect is noticeable only when the input
document has large solid areas. To reduce or
eliminate this defect, select the Photo option in the
Original Type feature of the Image Quality tab.