Xerox DocuColor 2060 - Manual (Page 300)

T E CH N I C A L D A T A
D O C U C O L O R 2 0 6 0 / 2 0 4 5 O P E R A T O R M A N U A L 7–4
Print Rates
Use the Productivity Setting in the Tools Mode to optimize the throughput speed
for the type of paper you run most frequently. This feature is available only for
the DocuColor 2060.
• Selecting Auto selects a Fuser temperature based on the paper weight
selected on the paper tray, improving average power consumption, but
slowing operation while the Fuser heats up or cools down.
• Selecting Light Weight sets the Fuser temperature to 160
o
C, which
optimizes the throughput speed for light weight papers, and uses less
power.
• Selecting Heavy Weight sets the Fuser temperature to 175
o
C, which
optimizes the throughput speed for heavier papers, and uses more power.
Refer to the Systems Administrator Guide for the procedure.
The DocuColor 2045 speeds for each paper weight are listed in this table and
cannot be changed.
:
Table 1. Substrate Print Speeds
*ppm = prints per minute
Substrate
DocuColor
2045
DocuColor 2060
Heavy Weight Light Weight Auto
64 - 80 g/m
2 45 ppm* 45 ppm 45 ppm 45 ppm
81 - 105 g/m
2 45 ppm 45 ppm 60 ppm 60 ppm
106 - 135 g/m
2 30 ppm 60 ppm 30 ppm 60 ppm
136 - 150 g/m
2 30 ppm 30 ppm 30 ppm 30 ppm
151 - 220 g/m
2 22.5 ppm 30 ppm 22.5 ppm 30 ppm
221 - 280 g/m
2 22.5 ppm 22.5 ppm 22.5 ppm 22.5 ppm
Transparencies 22.5 ppm 22.5 ppm 22.5 ppm 22.5 ppm