Xerox DocuColor 2060 - Manual (Page 272)

P R O B L E M S O L V I N G
D O C U C O L O R 2 0 6 0 / 2 0 4 5 O P E R A T O R M A N U A L 6–6
Problem Suggested Solution
Fresh copies used as
original documents
cause jams in the
Duplex Automatic
Document Feeder. This problem is caused by the oil used in the fusing
process. The problem can be reduced or eliminated
by allowing output to sit for awhile so oil can
evaporate before using them as original
documents.
Excessive paper curl
(continued on the next
page). Paper curl may be a result of:
• Ensure that the correct paper weight and paper
type are selected.
• The mass of dry ink (toner) coverage on the
copy - the greater the toner mass, the greater
the paper curl.
• The paper weight.
• The humidity conditions at the digital press
with scanner.
• You can sometimes minimize curl problems by
flipping the paper over in the tray and making
the copies again. If excessive curl is still
present, use a heavier paper.
• Attempt to minimize the amount of dry ink on
the copy paper by selecting the Photo feature
as the Document Type and/or the lighter and/
or less chroma image quality options.
• Select the Full Color option instead of 3 Pass
Color to minimize the amount of dry ink on the
copy paper.
• Empty the output device when output
approaches this limit to ensure continuous
production.