Xerox DocuColor 2060 - Manual (Page 310)

M A I N T E N A N C E
D O C U C O L O R 2 0 6 0 / 2 0 4 5 O P E R A T O R M A N U A L 8–6
5
Remove a new cartridge from the box.
CAUTION: Dry Ink/Toner settles and compacts during shipping and must be
loosened before inserting the cartridge into the machine. Failure to completely
loosen the material may cause damage to the gear at the end of the cartridge.
KEY POINT: Vigorously shake and/or slap the new cartridge with your hand
until the Dry Ink/Toner is completely loosened. To determine if the material is
loose, place your finger tips on the flat side of the gear cogs at the back of the
cartridge and turn the gear clockwise. When the gear turns freely, the material is
loose and the cartridge can be inserted into the compartment.
Figure 3. Turning the Cartridge Gear