Xerox DocuColor 2060 - Manual (Page 208)

S C A N N E R
D O C U C O L O R 2 0 6 0 / 2 0 4 5 O P E R A T O R M A N U A L 4–98
2
Touch the On button. The Build Job On screen is displayed.
Figure 80. Build Job On Screen
3
Touch either the On or Off button (under Blank Page Insertions) to have a blank
page placed at the end of the job.
4
Touch either the On or Off button (under Segment Separators) to have a
separator inserted between segments.
5
Touch the Save button to save your settings and return to the Basic Features
screen.
6
Continue selecting options for this segment just as you would for any ordinary
scan to print job.
NOTE: Options are programmed independently for each individual segment.
Therefore, after this segment is programmed and the Start button is pressed, all
options will return to the default settings. You will have to program the desired
options each time you scan a segment.
7
When you are finished selecting options for this segment, press the Start button.
Repeat steps 6 and 7 for each segment or press the Build Job Controls button,
described in steps 8 through 10, to access features available after each segment
is scanned.