Xerox DocuColor 2060 - Manual (Page 100)

P A P E R A N D P A P E R T R A Y S
D O C U C O L O R 2 0 6 0 / 2 0 4 5 O P E R A T O R M A N U A L 3–8
Tray Capacity
Paper Trays 1 and 2 have a capacity of 550 sheets of 24 pound (90 g/m
2
) paper.
Paper Tray 3 has a capacity of 2200 sheets of 24 pound (90 g/m
2
) paper.
Curl
When the paper is exposed to heat, the paper loses moisture and curls toward
the heat source. High coverage jobs tend to curl more due to the toner
plastification effect on the paper surface. The system tries to reduce this by
using mechanical devices within the paper path called decurlers.
Your system has been designed with an automatic curl control system that uses
information such as: the amount of coverage on the page, paper weight, whether
the paper is coated or uncoated, and the current humidity and temperature to
determine the amount of pressure needed at the different decurlers to reduce
output curl.
If you are experiencing excessive curl, remove the paper from the tray, turn it
over and replace it in the tray. If the curl is still excessive, refer to the System
Administration Guide, Tools Mode chapter, to change the decurler settings to
accommodate the environmental and paper conditions.
Duplexing
The DocuColor 2060/2045 duplexes prints from all paper trays up to 220 g/m
2
.
The system does not duplex media heavier than 220 g/m
2
or larger than 12.6 x
18” (321.1 x 458.1 mm).