Xerox DocuColor 2060 - Manual (Page 124)

S C A N N E R
D O C U C O L O R 2 0 6 0 / 2 0 4 5 O P E R A T O R M A N U A L 4–14
Color Mode
Auto
The Auto feature, located in the Color Mode column on the Basic Features
screen, enables the DocuColor 2060/2045 to automatically sense if the original
document is in color or black and white. If the original is in color, the DocuColor
2060/2045 automatically uses Full Color. If the original is in black and white, the
DocuColor 2060/2045 automatically uses Black Only, which reduces color dry ink
used.
Gold, silver, and fluorescent colors cannot be copied accurately. The dry inks
(toners) do not contain the metallic particles necessary to accurately reproduce
gold and silver colors or the fluorescent properties that are required to reproduce
fluorescent colors.
With the Auto Color option, some very dark colors may be sensed as black and
therefore copied as black. In these cases, select the Full Color option.
For the scanner to accurately sense the presence of color on a document during
the prescan cycle, the color area on the document must be greater than 2 inches
x 2 inches (approximately 50 mm x 50 mm). If the color area is less than 2 inches
x 2 inches (approximately 50 mm x 50 mm), select the Full Color option.