Xerox DocuColor 2060 - Manual (Page 190)

S C A N N E R
D O C U C O L O R 2 0 6 0 / 2 0 4 5 O P E R A T O R M A N U A L 4–80
N-Up
N-Up allows you to print multiple document images, in a specified order, on a
single sheet of paper. The images may be printed 2-Up, 4-Up, or 8-Up. If you have
an odd number of images, add a blank image to make it an even number. A
graphic representation appears on the right side of the display depicting your
choice.
You must specify the orientation of the original document, the original image,
and the paper in the chosen tray. You may select only one Original Type that will
apply to all originals for the job.
Each image will be centered within its position on the output page. Edge Erase is
used for the individual images in their section of the output page. When Auto is
selected in Lighten/Darken (refer to Image Quality), the setting of the first image
applies to the rest of the images.
Mixed Size Originals may be used in combination with N-Up, but image loss may
occur. The N-Up feature cannot be used in combination with the Interrupt,
Inserts, Covers, Booklet Creation, Mirror Image, Negative Image, Repeat Image,
Poster, Bound Originals, or Image Shift features.
1
Touch the N-Up button on the Output Format screen. The N-Up screen is
displayed.
Figure 63. N-Up Screen with 2-Up selected