Xerox DocuColor 2060 - Manual (Page 244)

A C C E S S O R I E S H I G H C A P A C I T Y S T A CK E R ( H C S )
D O C U C O L O R 2 0 6 0 / 2 0 4 5 O P E R A T O R M A N U A L 5–32
Jam Clearance
A paper jam in the High Capacity Stacker will be indicated by a message on the
digital press Touch Screen. Follow the instructions displayed. The image on the
HCSS Control Panel will flash showing the area where the jam is located.
Perform the following steps to clear the High Capacity Stacker jam and resume
printing.
Figure 21. HCS Jam Clearance Areas
1
Lift the High Capacity Stacker Top Cover.
2
Lift the green handle, or handles, indicated on the Touch Screen and remove all
paper in this area. Remove paper only from the areas indicated.
3
Close each green handle.
4
Close the High Capacity Stacker Top Cover.
5
If the Touch Screen indicates there is a jam in the digital press, follow the
instructions on the screen to remove any paper in the area indicates. Refer to the
Jam Clearance section in the Problem Solving chapter in this manual.
6
Follow the instructions displayed on the digital press Touch Screen to resume
printing.