Xerox DocuColor 2060 - Manual (Page 93)

D O C U C O L O R 2 0 6 0 / 2 0 4 5 O P E R A T O R M A N U A L 13 3–1
P
A
PER
AN
D
P
APE
R
T
RAY
S
3. Paper and Paper Trays
Recommended Papers and Special Materials
Refer to the Color Materials User Guide and the Recommended Materials List for
paper guidelines. The Recommended Materials List is a downloadable file on
www.xerox.com. Use the search parameters DC 2060 or DC2045 and follow the
path until you reach the files that can be downloaded.
Paper Handling
For the best performance load paper with the seam side down in Trays 1 and 2
and seam side up in Tray 3. The seam side is where the ream of paper is sealed.
NOTE: Many suppliers use arrows on the product labels to indicate the
preferred side to image first. Use this side (as signaled by the arrow) as
equivalent to the seam side when loading the paper.
Many factors affect the performance of paper, including room temperature,
humidity, paper quality, dust, and the size of the image area. If jams or paper curl
problems occur, remove the paper from the paper tray, turn it over, place it back
in the paper tray, and resume printing. If the problem is rectified, continue to load
your paper in the same manner. If the problem is not rectified, load a new ream
of paper and try the process again. If the problem persists, your System
Administrator can go into the Tools Mode and try the different decurler settings.
If, after trying all the previous suggestions, the problem still persists, call your
Xerox representative.