AASTRA 1560_1560ip User Guide - Manual (Page 5)

Security
eud-1431/1.0 – OIP R8.3 – 02.2012
5
Purpose and function
This product is part of the Aastra 400 communication solution.
The software can only be launched if a communication server, configured accordingly,
is detected.
The Aastra 1560/1560ip can be used as an operator console on a stand-alone system
or in a networked environment with several systems. Besides the wide array of tele-
phone operator functions the phone also provides all the featurephone functions
required for personal use.
Aastra 400 is an open, modular and comprehensive communication solution for the
business sector with several communication servers of different output and expan-
sion capacity, a comprehensive telephone portfolio and a multitude of expansions.
They include an application server for Unified Communications and multimedia serv-
ices, an FMC (Fixed Mobile Conversion) controller for integrating mobile phones, an
open interface for application developers and a multitude of expansion cards and
modules.
The business communication solution with all its components was developed to
cover in full the communication requirements of businesses and organisations, in a
way that is both user- and maintenance-friendly. The individual products and compo-
nents are coordinated and must not be used for other purposes or replaced by third-
party products or components (unless it is to connect other approved networks,
applications and telephones to the interfaces certified specially for that purpose).
Protection against listening in and recording
The Aastra 400 communication solution comprises features which allow calls to be
monitored and recorded without the call parties noticing. Please note that these fea-
tures can only be used in compliance with national data protection provisions.
Availability
The availability of the Aastra 1560/1560ip depends on a functioning PC with power
supply, and the availability of the data network and the communication server
(including OIP server). If the Aastra 1560/1560ip is not available, calls are displayed on
the coupled phone (Aastra 1560) or routed to a substitute destination set by your sys-
tem administrator (Aastra 1560ip).
eud-1431_POOL_en.book Page 5 Wednesday, February 15, 2012 12:30 PM