Settings in the configuration, User, Private settings – AASTRA 1560_1560ip User Guide User Manual

Page 79: Settings in the configuration user, Configuration

Advertising
background image

Configuration

eud-1431/1.0 – OIP R8.3 – 02.2012

79

Settings in the configuration

This section explains how to adapt the configuration to suit your personal
requirements.

User

Carry out the following partial steps to make your personal settings.

Private settings

You can enter your personal data such as

Password

for Aastra 1560/1560ip (by default

0000

), your user

PIN

as well as your personal phone number and e-mail addresses.

Activate presence state synchronization:

You have three possibilities for specifying how your presence state is synchronized
between the communication server and Outlook. Both settings are activated as
standard.

Note:
Your PIN applies to all your phones.

Setting

Description

Outlook to communication server

is acti-

vated:

If you change your presence state manually in the
Aastra 1560/1560ip, the changes and the appointments in Out-
look are synchronized in the communication server and dis-
played on your phone. Although changes to your presence
state on your phone are adopted in OIP, they do not change
your Outlook appointments.

Outlook to communication server

and

Communication server to Outlook

are

activated:

If you change your presence state manually in the
Aastra 1560/1560ip, the changes and your appointments in
Outlook are synchronized in the communication server and
displayed on your phone. Changes to your presence state on
your phone are adopted in OIP and also synchronised in Out-
look.

Both settings are deactivated

You can only change your presence state in the communication
server manually in the Aastra 1560/1560ip. The communica-
tion server to Outlook setting is also automatically deactivated
if the Outlook to communication server setting is deactivated.

eud-1431_POOL_en.book Page 79 Wednesday, February 15, 2012 12:30 PM

Advertising