AASTRA 1560_1560ip User Guide - Manual (Page 83)

Configuration
eud-1431/1.0 – OIP R8.3 – 02.2012
83
Phone
Carry out the following partial steps to configure your phone using Aastra 1560.
Note that these settings depend on the type of phone (comfort level, desk
phone, cordless or mobile phone) you have connected to Aastra 1560. Moreover,
the communication server determines which settings you can make via
Aastra 1560 and which ones you can make directly on the phone.
Audio
You can modify the following ring settings of your phone:
General
You want to view or modify your phone’s settings. You can choose the following set-
tings:
Setting Description
Normal ring settings Volume , Melody and Speed .
External ring melody
Tick the Use external ring melody checkbox and select a melody
so you can differentiate internal calls from external calls acous-
tically (depending on the terminal).
Discreet ringing (only on cordless/mobile
phones)
• Tick Activate for discreet ringing if you do not want to be dis-
turbed by your phone ringing. The phone rings just once.
• Volume , Melody and Speed .
Vibra call (only on cordless/mobile
phones)
Choose between Audio , Vibra call , Both or LED only .
Attention tone
• Volume and melody for attention tone, e.g. for call waiting or
announcement.
• Tick the checkbox for Attention tone for messages so that new
messages are signalled acoustically.
Loudspeaker / handset Volume for handset and loudspeaker.
Open the Configuration .
Select the Phone dialog box. If you have registered several phones, highlight
the phone you want.
Select the
Audio tab.
Select the settings you want and click Apply to confirm.
➔
The settings are stored.
eud-1431_POOL_en.book Page 83 Wednesday, February 15, 2012 12:30 PM