Printronix T2N - Manual (Page 101)

101
Figure 27. Show Configuration
Saving this file allows administrators to review and store the configuration as a receipt once the setup
procedures are completed. Another benefit is that this file can be sent to the Printronix Customer
Support center upon request if there is a problem.
Print Test Page
The “Print Test Page” button in the Printer Function section forces the printer to print a test page that
consists of a grey print test pattern followed by the current configuration. The configuration format is
the same as
shown with the “Show Configuration” option.
001 T2N Configuration (7/2/12 5:03pm)
002 VERSION V1.11D 23-Jun-12 #372123
003 SERIAL NUMBER 3T2N21235093
004 DPI 203
005 PRINTER USAGE 1923442 inches
006 PRINTHEAD USAGE 574391 inches
007 CUT COUNT 455
008 FLASH 8 MB
009 DRAM 32 MB
010 MEDIA/SENSOR
011 Print Speed
4 IPS
012 Print Intensity -3
013 Media Handling Continuous
014 Print Mode Direct
015 Label Width 3.9 inch
Figure 28. Test Page
Alternatively, the test page can be printed by rebooting the printer while holding the FEED key on the
control panel.