Printronix T2N - Manual (Page 64)

64

Printer Configuration Tabs. This subsection allows users to set up and store a configuration in
the T2N printer. The available tabs for configuration include:
Tab Description
Media/Sensor Configures all label and sensor settings.
Interface Configures the host I/O, including serial and Ethernet.
PGL Configures PGL settings.
ZGL Configures ZGL settings.
EGL Configures EGL settings.

Printer Functions. This subsection consists of a set of buttons used to perform setup actions
(e.g., Calibrate Sensor and Active Emulation), diagnostics, and other important features such as
firmware upgrade. See Printer Functions on page 95 for more details.

Printer Status. This subsection queries the printer regarding status (e.g., Ready, Head Open,
Paper Jam, Out of Paper, etc.). See Printer Status on page 104 for more details.
Printer Information
Figure 11 shows printer information. Upon clicking the “Read” button, the printer’s information
populates the Configuration Utility. All items shown are read-only and cannot be modified. This
section describes the fields in greater detail.
Figure 11. Printer Information Values
IMPORTANT: If you contact the Printronix Customer Support Center for technical support,
report these field values for prompt handling.
Version
The Version consists of the model name, program file version, program file date, and program file
part number. The model name is T2N2 = 203 DPI, T2N3 = 300 DPI. The program file version is in
Printronix format Vm.xxYY. See Version Number on page 58 for information on Vm.xxYY format.
Note: When contacting the Customer Support Center, use the program file part number to
identify the software.
Serial No.
Serial No. is the serial number of the printer set in the Factory.
DPI
The printer DPI value (203 or 300 DPI) displays in this field.