Printronix T2N - Manual (Page 88)

88
PGL Diagnostics
This option is to available to select how to handle error conditions with PGL commands and forms
when encountered:

On (factory default). Full error checking reported. Any element that falls off the current
page is reported as an error.

Off. There is no error checking. Graphic elements such as alpha, line, barcodes, etc. will
be clipped if they are beyond the page boundaries.
Storage Select
This menu allows the user to map the parameter DISK to either the Flash (PCB Flash) or SD
card.

DISK = PCB Flash

DISK = SD (factory default)
ZGL Tab
ZGL Setup options are shown in Figure 21 with factory default settings.
Figure 21. ZGL Setup