Printronix T2N User Manual
Page 74
74
Clip Page
This option determines how the printer handles Label Length values that are larger than actual
label length (or Sensed Distance) when using gap or black mark media. This option has no effect
when the Label Length parameter is less than the actual label length. This option is illustrated in
Figure 14.
Enable (factory default). When the Label Length value provided by the user or
application is greater than the actual label length, the printer clips the excess image to fit
the label. The excess image is now lost and the following label can be used to print
subsequent images.
Disable. When the Label Length value provided by the user or application is greater than
the actual label length, the printer prints the excess image on the next label(s). Once the
image is completely printed, the printer will go to the next top-of-form.
Feed
Label
Length
1
2
3
4
5
6
7
8
9
10
11
Sensed
Distance
1
2
3
4
5
6
7
9
10
11
Label #1
Label #2
Label #3
1
2
3
4
5
1
2
3
4
5
Clip Page Disable
1
2
3
4
5
6
7
8
9
10
11
1
2
3
4
5
6
7
Label #1
Label #2
Label #3
1
2
3
4
5
1
2
3
4
5
Clip Page Enable
1
2
3
4
5
6
7
Feed
Figure 14. Clip Page Handling
Cut Label Count
This option is used when the cutter is installed and enabled, and the user specifies the number of
labels between each cut.
The factory default is 0 (no cutter action).