Printronix T2N - Manual (Page 63)

63
Test the Connection
Once Tool Interface selection is complete, click the Read button in the lower-right corner (see Figure 6,
page 59)
to upload the printer’s current configuration into the Configuration Utility fields. For USB
connection, this process is automatic.
If the Configuration Utility is working properly, the “Communicating…” progress bar appears and the
Printer Configuration values will be populated. If communication is not working properly, an error will
display indicating
“Port Open Error” or “Data Transmission Error”.
If communication problems persist, change the Tool Interface to USB. This is the easiest method of
establishing communication with the printer. Once communication is established, click
“Read” to upload
the configuration. Check the Interface Tab settings if necessary.
Printer Configuration
Four main sections are available in the Configuration Utility, each is represented as a tab at the top level.
Figure 10 below shows the Printer Configuration tab.
Figure 10. The Printer Configuration Tab
Printer Configuration displays when the Configuration Utility is launched. Components of this section
include:

Printer Information. This subsection displays information about the T2N printer currently
connected to the Configuration Utility. See Printer Information for more details (page 64).