Printronix T2N - Manual (Page 95)

95
Printer Functions
Printer Functions to the left of the Printer Configuration section as highlighted in Figure 23.
Figure 23. Printer Functions
The functions include:

Calibrate Sensor: calibrates the labels and sensors. See page 96.

Active Emulation: selects the Emulation (Auto Switch, PGL, ZGL, EGL). See page 99.

RTC Setup: configures the real-time-clock. See page 100.

Show Configuration: assembles the Configuration into a readable file. See page 100.

Print Test Page: prints configuration test page on the printer. See page 101.

Reset Printer: reboots the printer. See page 102.

Factory Default: resets the printer configuration to factory defaults. See page 102.

Cut Fwd and Cut Rev: moves the cutter one rotation forward or backward. See page 102.
Note: There is no observable difference between ‘Cut Fwd’ and ‘Cut Rev’. These options
clear the paper path through the cutter in the event of a paper jam.

Job Capture: diagnostics to dump or capture the host data. See page 102.

Ignore AUTOFR: ignores the Auto form capability with in EGL. See page 103.

Password Setup: protects configuration with passwords. See page 103.

Firmware Upgrade: upgrades the printer firmware. See page 104.