Printronix T2N User Manual

Page 47

Advertising
background image

47

Adjust the printhead pressure adjustment knob.

The printhead pressure adjustment knob has
five setting levels. Clockwise adjustment
increases the printhead pressure. Counter
clockwise adjustment decreases the printhead
pressure.

If the wrinkle on the label starts from the lower
right side to upper left side, do following:

1. Decrease the left side printhead

pressure adjustment knob setting one
level per each adjustment then print the
label again to check for wrinkles.

2. If the left side printhead adjustment knob

level is set to index 1 (the lowest
pressure index), increase the right side
printhead pressure.

3. If the wrinkle still exists, contact the

Customer Service Department of your
reseller or distributor for service.

Adjust the printhead pressure adjustment knob.

The printhead pressure adjustment knob has
five setting levels. Clockwise adjustment
increases the printhead pressure. Counter
clockwise adjustment decreases the printhead
pressure.

If the wrinkle on the label starts from the lower
left side to upper right side, do following:

1. Decrease the right side printhead

pressure adjustment knob setting one
level for each adjustment then print the
label again to check for wrinkles.

2. If the right side printhead adjustment

knob setting is set to index 1 (the lowest
pressure index), increase the left side
printhead pressure.

3. If the wrinkle still exists, contact the

Customer Service Department of your
reseller or distributor for service.

Left knob

Right knob

Advertising