Printronix T2N - Manual (Page 14)

14
Media Specifications
Media Specifications 203 dpi models 300 dpi models
Label roll capacity 203.2 mm (8 in.) OD
Media alignment Edge alignment
Media type Continuous, die-cut, black mark, fanfold, notch
Media wound type Printing face outside wound
Media width (label + liner) Max. 118 mm (4.6 in.)
Min. 25.4 mm (1.0 in.)
Media thickness (label + liner) Max. 0.28 mm (0.0110 in.)
Min. 0.06 mm (0.023 in.)
Media core diameter 25.4 mm - 76.2 mm (1 in. ~ 3 in.)
Label length
(Tear-Off Strip, Continuous Mode) 5 - 2,286 mm (0.2 in. -
90 in.) 5~1,016 mm (0.2 in. - 40 in.)
Label length (Peel-Off mode) Max. 152.4 mm (6 in.)
Min. 25.4 mm (1 in.)
Label length (Cut mode) Max. 2,512 mm (99 in.) Max. 1,223 mm (48 in.)
Min. 25.4 mm (1 in.) Min. 25.4 mm (1 in.)
Gap, notch, and hole height Min. 2 mm (0.08 in.)
Black mark height Min. 2 mm (0.08 in.)
Black mark width Min. 8 mm (0.31 in.)