Grain Systems PNEG-1851 - Manual (Page 15)

Chapter 2: The Portable Dryer
DANGER
Make sure to turn off the main electrical disconnect switch prior to servicing your
dryer. Only the main electrical disconnect switch turns off power to the dryer and all
electrical cabinets. Failure to do so might lead to serious injury or death.
DANGER
Pressing the Emergency Stop button stops dryer functions but does not turn off the
power that is present at the various electrical cabinets. Turn off the main electrical
disconnect switch to shut off power to the dryer and all electrical cabinets. Failure to
do so might lead to serious injury or death.
Dryer Configurations
As a result of their modular design, portable dryers are available in several fan and heater configurations,
thus making them practical in their functionality and customizable to your grain drying needs.
The following table outlines the different dryer configurations for portable dryers. Make sure to identify your
specific configuration before completing the hardware setup (see
Configuring Your Dryer’s Hardware,
page 29 for details).
IMPORTANT: Make sure to enter the number of modules that corresponds to your actual dryer configura-
tion. If you enter a value that is greater or less than the actual number, the dryer will not
start because the system will search for missing or undeclared fans or heaters.
Table 2-2 The available configurations for portable dryers
Dryer con-
figuration Description Dryer con-
figuration Description
1-module, 1-fan portable
dryer
This single-module config-
uration includes one fan,
one heater, and one
plenum chamber 1-module, 2-fan portable
dryer
This single-module configura-
tion includes two fans, two
heaters, and two plenum
chambers
1-module, 3-fan portable dryer
This single-module configuration includes three fans, three heaters, and
three plenum chambers
PNEG-1851 Vision N2 15