Grain Systems PNEG-1851 - Manual (Page 98)

Appendix C: Messages
Table C-1 Status messages for both the continuous flow and staged batch modes (cont'd.)
Message Drying modes Occurrence Description
Unloading Staged batch Displayed during the unloading
phase Indicates the time remaining on
the unloading timer
Unloading
Cleanout Continuous flow,
staged batch Displayed when the cleanout
delay is active Indicates the time remaining on
the cleanout delay
Dryer Cooling
Down Continuous flow,
staged batch Displayed when the cool-down
timer is active The dryer is not running, but the
fans are in operation throughout
the duration of the cool-down time
Emergency
Cooling Continuous flow,
staged batch Displayed once an emergency
cooling has been initiated, in
response to a grain overheat
shutdown Indicates the time remaining on
the cool-down timer
Temperature
Hold Staged batch Displayed during the drying
phase in either the time or time
and temperature control
scheme, once the drying timer
elapses and the grain tempera-
ture has yet to reach its setpoint Indicates the difference (in
degrees) between the grain tem-
perature setpoint and the grain’s
actual temperature
98 PNEG-1851 Vision N2