Grain Systems PNEG-1851 - Manual (Page 95)

Appendix B: Grain Drying Graphs
NOTE: To apply the dry and cool strategy with a multiple-fan dryer: a) select either the Time or Dual-
Setpoint Time control scheme; b) set the Cooling Timer to an appropriate value (a value
other than 0 seconds); c) place the upper Heater and Fan switches in the On position on the
control panel and the lower Heater and Fan switches in the Auto position. See
Drying Grain in
Staged Batch, page 63 for the complete drying procedure.
PNEG-1851 Vision N2 95