Grain Systems PNEG-1851 - Manual (Page 24)

Chapter 2: The Portable Dryer
Figure 2-5 Samples of the various parameter fields
NOTE: Images of the dryer, control panel, and user interface menus that are included in this guide are for
illustrative purposes only and might not entirely resemble the actual product.
What You Should Know
When entering parameter values, remember the following:
• Except for the parameter shortcuts in the main menu’s system pane, the keypad is only accessible
through the Edit icon.
• The Remaining field always displays a countdown of the timer or delay that is directly above it.
Simply click its Edit icon to interrupt the countdown and enter a new value.
• When you click the Trash icon in counter fields, the displayed count is permanently erased and
cannot be retrieved.
• Not all entries made using the incremental adjustment buttons take immediate effect; some require
you to click Save to store your settings.
• In some instances, the up/down arrow buttons used for incremental adjustments might be replaced
by + and – buttons.
Entering Parameter Values with the Keypad
For parameters whose values are modifiable via the Edit icon, you can enter and save their values using
the numeric keypad.
What You Should Know
The keypad is used to enter numeric values pertaining to speed, timers or delays, and temperature or
moisture content, in a format that is unique to each type. For example, some temperature parameters
require you to enter one digit to the right of the decimal separator and others do not. Always refer to the
parameter range appearing at the top of the keypad for the required format. The following figure shows a
typical numeric keypad.
24 PNEG-1851 Vision N2