2 display window – B&K Precision 4034 - Manual User Manual
Page 16
16
configurations (SETUP), and utility options (UTIL).
5. Numerical Keypad - Numeric entry keys for entering values for various functions and modes
6. Unit Setting Keys
- Quick keys for setting units for frequency, time, and amplitude
7. Rotary Knob
- Used to increment/decrement numerical values or to scan through the possible
selections.
8. Cursor Keys
- Used to move the cursor (when visible) to either left or right when modifying
values of various parameters.
9. Output ON
- Controls the main output signal. In model 4033, the output status is ON when
display shows “Out On” and the button lights up. In Model 4034, display will
show “On” next to “ch1” and/or “ch2” indicators depending on which channel is
selected to be on.
10. Channel Output
- (model 4034) Dual BNC independent channel outputs (50
Ω) of pulse signal.
11. Output ON
- (model 4033) Controls the main output signal. The output status is ON when
illuminated.
12. Channel Output
- (model 4033) BNC channel output (50
Ω).
13. Sync Out
- (model 4033) Sync output, 50
Ω 5V TTL level. Sync out for dual channel model
4034 is located in the rear panel of the instrument.
14. CHAN Key
- (model 4034 only) Channel select key
15. MAN TRIG Key
- Sends manual trigger pulse when pushed (requires instrument to be in manual
trigger mode)
16. ENTER Key
- Used for confirming parameter adjustments and settings.
3.2 Display Window
The pulse generator has a graphical LCD display that can display up to 160 x 80 dots. When you power-on the unit
a
parameter (Frequency) and its current settings appear in the display
. The bottom displays a menu that corresponds to the
function, parameter or mode display selected.
Figure 3.2 - LCD Display Screen
1. Channel/Output Display
Displays the current selected channel (when highlighted). (For model 4034 only). Also displays
highlighted text “Out On” when output is ON (For model 4033) or displays a highlighted text “On” next
to “Ch 1” and/or “Ch 2” when either or both channel outputs are ON (For model 4034).
1
2
3
4
5
6
7