B&K Precision 4034 - Manual - Manual (Page 20)

20
 TTL
 CMOS
 USER
 HIPRED | LOPRED
o OUTPUT LIMITS
 LIM OF
 LIM ON
 HILIM
 LOLIM
 PREV
- PULSE
o RISE
o FALL
o EQUAL
o NORM | COMPL
- MODE
o CONT
o TRIG
 MAN (Manual Trigger)
 INT (Internal Trigger Rate)
 EXT (External Trigger)
 PREV
o GATE
 MAN (Manual Gate Trigger)
 INT (Internal Gate Trigger Rate)
 EXT (External Gate Trigger)
 PREV
o BURST
 MAN (Manual Burst)
 INT (Internal Burst Rate)
 EXT (Burst External)
 NBRST (Number of Bursts)
 PREV
o EXTWID
- SETUPS
o RECALL
o STORE
o CLEAR ALL
- UTIL
o GPIB (ACTIVE) (GPIB Address)
o RS232 (ACTIVE) (Baudrate)
o INTEN
o POWER (Power On Setup)
3.6.1 PARAMETER Menu
This key selects and displays the waveform frequency, amplitude, offset and external reference and allows changing the
parameter data.
Frequency Menu
F1: PERIOD/FREQ - Selects and displays the period or the pulse frequency. Change the values using the
cursor keys, rotary knob or numerical keys. If a certain setting can't produce the
waveform at the desired parameters, the generator displays an error message. While the