B&K Precision 4034 - Manual - Manual (Page 56)

56
is generated after a programmable delay. This delay is set by either the :PULSE:DELAY or the
:PULSE:DOUBLE:DELAY command.
COMMAND TYPE: Setting or Query
SETTING
Syntax: [:SOURce]:PULSe:DOUBle[:STATe]<ws><Boolean>
Arguments:
Type: Boolean
Examples: :PULS:DOUB ON
:PULS:DOUB:STAT OFF
QUERY
Syntax: [:SOURce]:PULSe:DOUBle[STATe]?
Examples: :PULS:DOUB?
Response: 0 | 1
4.12.1.16 Double Pulse Delay
This command is used to set the delay of the second pulse, from the time of the trigger, in the double
pulse mode. It has exactly the same effect as the :PULSE:DELAY command, and is included in the
command set for compatibility purposes.
COMMAND TYPE: Setting or Query
SETTING
Syntax: [:SOURce]:PULSe:DOUBle:DELay<ws><delay>[units]
Arguments:
Type: NRf
Units: S (seconds), MS (milliseconds), US (microseconds), NS nanoseconds
Range: 0NS to 9.80000S
Rounding: To current resolution
Examples: :PULS:DOUB:DELay 150NS
QUERY
Syntax: [:SOURce]:PULSe:DOUBle:DELay?
Examples: :PULS:DOUB:DEL?
Response: NRf
CONSIDERATIONS:
The allowed range of the delay will be determined by the values of the period, width, and
transition times.
4.12.1.17 Leading Edge Time
This command is used to set the value of the leading edge time. If the edge-tracking feature is ON,
changing the leading edge will cause the same change in the trailing edge.
COMMAND TYPE: Setting or Query
SETTING
Syntax: [:SOURce]:PULSe:TRANsition[:LEADing]<ws><lead time>[units]
Arguments: