B&K Precision 2532B - Manual - Manual (Page 101)

101
1. Press CURSOR button to enter the cursor function menu.
2. Press the “Cursor Mode” option button to select “Manual”.
3. Press the “Type” option button to select “Voltage” or “Time”
4. Press the “Source” option button to select “CH1”, and “CH2”,
“MATH”, “FFT”, “REFA”, “REFB” according to input signal
channel.
5. Select “Cur A” and turn the “Universal” knob to adjust Cursor
A.
6. Select “Cur B” and turn the “Universal” knob to adjust Cursor
B.
7. The measurement values are displayed on the top left corner.
If the measurement type is set to “Voltage”, the values are as
follows:
The value of Cur A: Cur A
The value of Cur B: Cur B
The voltage increment between Cursor A and Cursor
B: ∆V
If the measurement type is set to “Time”, the values are as
follows:
The value of Cur A: Cur A
The value of Cur B: Cur B
The time increment between Cursor A and Cursor B: ∆T
The reciprocal of time increment between Cursor A and
Cursor B: 1/∆T
Figure 49 - Cursor Menu