B&K Precision 2532B - Manual - Manual (Page 63)

63
Table 14 - Trigger Setup Function Menu
Option Setting Explain
Coupling
DC Passes all components of the signal
AC
Blocks DC components, attenuates signals below
50 Hz.
HF Reject
Attenuates the high-frequency components above
150 kHz.
LF Reject
Blocks the DC component attenuates the low-
frequency components below 7 kHz.
Holdoff Using the “universal” knob to adjust holdoff time
(sec), the holdoff value is displayed.
Holdoff
Reset
Reset holdoff time to 100 ns.
Return Return the first page of “Trigger main menu”.
Figure 31 - Trigger Menu Screen