B&K Precision 2532B - Manual - Manual (Page 122)

122
2. Insert USB flash drive to USB host port of the oscilloscope and
wait until the oscilloscope has initialized USB flash drive (about
five second).
3. Press the “Save to” option button to select “file”.
4. Press the “Save” option button to go into the Save/Recall
interface.
5. Press the “New folder” button to create a new folder
6. Press the “Del folder” option button to delete a folder
7. Press the “Modify” option button to modify a folder.
8. Press the “New file” option button to create a new file
9. Press the “Del file” option button to delete a file
10. Press “the next page” option button and press the “Rename”
option button to modify the name of the file or the folder.
11. Turn the “Universal” knob to select the folder and press the
“Confirm” option button and you will save the set to the USB
drive.
To Recall setup data from USB flash drive, do the following:
1. Press the “SAVE/RECALL” button.
2. Press the “Type” button to select “Setups”.
3. Insert USB flash drive to USB host port of the oscilloscope and
wait until the oscilloscope has initialized USB flash drive (about