B&K Precision 2532B - Manual - Manual (Page 71)

71
2. If you select “Line Num”, you can turn the “Universal” knob
to set the appointed line number.
Set up Standard
1. Press the “next Page Page2/2” option button.
2. Press the “Standard” option button to select “PAL/SECAM”
or “NTSC”.
Slope Trigger
Trigger on positive slope or negative slope according to setup time of the
oscilloscope.
Table 19 - Slope Trigger Function Menu 1
Option Setting Instruction
Type Slope Trigger on positive slope of
negative slope according to setup
time of the oscilloscope.
Source CH1
CH2
EXT
EXT/5 Select trigger source.
When Select trigger condition.