B&K Precision 2532B - Manual - Manual (Page 56)

56
Horizontal System
Shown below, there is one button and two knobs in the HORIZONTAL
area.
Table 12 - Horizontal System Function Menu
Option Setting Description
Delayed On
Off Turn on this function for
main timebase waveform
to display on the top half
screen and window
timebase waveform to
display on the below half
screen at the same time.
Turn off this function to
only display main timebase
waveform on the screen.
Horizontal Control Knob
You can use the horizontal controls to change the horizontal scale and
position of waveforms. The horizontal position readout shows the time
represented by the center of the screen, using the time of the trigger as zero.
Note: - X-Y mode waveforms are not stored as reference waveforms.
- You cannot adjust the horizontal position and scale of the
reference waveform.